Pneumatic Circular Sample Cutter | N1750P
The pneumatic round sample punch consists of a serrated upper blade and a die, through which the sample is expelled downward. For easy removal of the punched sample, a sample slide is mounted on the punch. An acrylic glass safety guard is attached around the punch blade. The round sample punch is available with either a hand or foot switch.
Description
The Pneumatic Circular Sample Cutter consists of a serrated upper blade and a die, through which the sample is expelled downward. For easy removal of the punched sample, a sample slide is mounted on the punch. An acrylic glass safety guard is attached around the punch blade. The round sample punch is available with either a hand or foot switch.
The sample is placed in the punch. The hand or foot switch is used to send the upper blade through the die. The punched sample falls to the sample slide and can then be removed.
Technical Specifications
General
- Standard cutting surface: 10 cm², 50 cm² or 100 cm²
- Other dimension on request
- Manual or foot control
- Plexiglass protection
- Pneumatic sample cutter
- Foot control in option
- Operating Manual
Related products
-
View Product
HT-1XS Hot Tack Tester
Touch Screen Precision Hot Tack Tester for determination of the hot tack seal strength of flexible packaging materials, to ASTM F1921.
In vertical (VFFS) and horizontal (HFFS) form-fill operations, heat seals are often subjected to forces whilst still hot. If the hot seals are unable to resist these forces then unsealed areas or holes into the package can occur during the process. The RDM HT-1XS Hot Tack Tester measures the strength of hot seals enabling selection and compliance testing of suitable flexible materials for packaging applications. Precise control of sealing process variables (temperature, pressure, and time) in production then enables an optimal balance between material specification, packaging machine speed and seal integrity.
-
View Product
HL-5 Low Pressure Heat Sealer (Multi-Jaw)
HL-5 Low Pressure Heat Sealer used to determine the sealability of various papers, foils, laminates and films.
The Low Pressure Heat Sealer HL-5 allows you to determine the sealability of coated paper, aluminium foils and laminates as well as other heat-sealable multi-layer films. You can easily determine the optimum sealing parameters for any film types used for pressure-sensitive packaging applications.
Our design is based on proven technology to fulfil the following requirements:
- Tests for research and development
- Quality control during the production process
-
View Product
58-06 Parker Print-Surf (Single Head)
The measurement of the Parker Print-Surf gives valuable information for the Printing Process. The data, the amount and the way the ink should be applied can be predicted. This information helps to avoid time consuming and costly printing problems.
-
View Product
HSB-1 Laboratory Heat Sealer
For production of heat seals and/or measurement of heat sealability of flexible packaging. Produces seals up to 300mm long x 5 to 25mm wide.
