Sample Punch for Stiffness and Tear Tester | N3001
The hand punch allows fast preparation of samples for Elmendorf or bending tests. It consists of a triangular upper and lower blade. The punch is operated via a hand lever
Description
The hand punch allows fast preparation of samples for Elmendorf or bending tests. It consists of a triangular upper and lower blade. The punch is operated via a hand lever.
Choose dimensions when you order :
– l x L : 38 x 75 mm
– l x L : 38 x 70 mm
– l x L : 50 x 62 mm
– l x L : 50 x 65 mm
Other size on request
The material to be punched is placed against the rest on the lower blade. When the hand lever is pushed down, the sample is evenly cut and falls through the die below the punch, where it can then be removed from the side.
Resources
Related products
- View Product
Resonance Stiffness Tester System Kodak | N4100
For the evaluation of the stiffness of paper and cardboard according to the resonance length method.
Compliant with standards ISO DP 5629, NF Q 3025, DIN 53 123.
- View Product
Valley Laboratory Beater | 070113
Beater type “Valley” for laboratory beating of pulps under standardised conditions.
- View Product
Bauer McNett Fibres Classifier | 070314
For the determination of the pulp fibre length by classification method.
- View Product
PFI Mill | PTB-508Ai
For use in the laboratory for beating of chemical pulps under standardised conditions and also for the defibration of semi-digested raw material fibres.
