Micrometer | N1102/N1102P
Micrometer device to measure the thickness of a sheet of corrugated cardboard.
Description
The robust micrometer is available in either pneumatic or manual configuration. Depending on the model, the device is operated via a hand lever or a pneumatic foot pedal. The descending speed acc. to standard is set with a throttle. A battery powered digital measurement gauge is mounted on the device for displaying the measurement results.
Features
TEST DESCRIPTION :
Depending on configuration, the measuring pin is lifted via the pneumatic foot pedal or manually with the lever mounted on the side, and the sample is placed in the measurement area. Then the pedal or lever is released, and the measuring pin lowers at a speed limited by the throttle onto the sample. The digital measurement gauge displays the result of the measurement.
SPECIFICATIONS :
- Bound the lowering speed via a throttle
- Battery operated digital measurement gauge
- Resolution: 1 μm, reproducibility : ± 2 μm
MODELS :
- N 1102 – Manual model : 10 cm² measuring pin N 1102P
- Pneumatic model : 10 cm² measuring pin
Technical Specifications
General
- Measuring range 0 – 25 mm.
- Measuring accuracy 0.01 mm.
- Measuring surface 10 cm².
- Measurement pressure 20 kPa.
- Resolution: 1 μm, reproducibility: ± 2 μm
Compressed air : 400 Kpa only on the pneumatic model
Weight: 18kg / 25kg packaged
Dimensions: (w x l x h): 200 x 250 x 300 mm / 500 x 500 x 500 mm Packaged.
Included:
- One micometer
- One foot for pneumatic model
- Operating book
Related products
-
View Product
NE9 56S Drying Oven
The NE9 series Drying Oven, with gravity convection and variable fan speed for forced air circulation with a stainless steel chamber. Dial controls for Air Flap and Fan Speed settings, bold illuminated LED temperature display offering precise time and temperature control from ambient +5C to 300C. Run back timer and delay start feature. With energy efficiency in mind, particular attention is paid to providing a good tight door closure and hinge design to maintain a sealed chamber in use. As the unit has a sealed chamber, less energy is used to hold set temperature and the smart controller will pulse energy to maintain set point throughout operation.
-
View Product
TMI 10-20 Digital Ink Rub Tester
The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance.
The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance. Several tests can be performed including dry rub-the amount of transfer ink from one dry surface to another, wet rub-the amount of transfer of ink from wetted surface to another, wet bleed or transfer-ink transfer to a water-saturated blotter, wet smear-similar to wet bleed with the addition or rub cycles, functional rub/wet rub-smear or transfer tests using a liquid other than water and hot abrasion. An optional heated weight provides a uniform test for evaluating “hot abrasion” resistance of printed cartons, labels etc.
Superceeds TMI Model 10-18 Digital Ink Rub Tester.
-
View Product
13-56 Burst Tester
The new and improved 13-56 Burst Tester has been designed for burst and leak testing on Flexible Packaging, such as paper, foils, paper boards, corrugated board, textiles etc
-
View Product
Puncture Jig
Puncture / Burst Test Jig for use with a Universal Testing Machine
Puncture resistance is a useful characteristic to determine the performance of a thin film particularly when packaging items that are likely to pierce the film, such as sharp, pointed, and hard items of food, electronics, medical devices etc.
Several testing methods describe the tooling/hardware, sample preparation, test parameters, and measured results, including ASTM, ISO, DIN and JIS methods.
