Valley laboratory beater | 070113
Beater type “Valley” for laboratory beating of pulps under standardised conditions.
Description
Beater type “Valley” for laboratory beating of pulps under standardised conditions.
Designed to meet:
- ISO 5264/1
- SCAN C25
- TAPPI T200m
- T205m
Features & Benefits
Features:
- 3 safety systems.
- Digital revolution counter and digital display.
- Speed of revolution according to ISO and TAPPI.
- Top opening.
- Disintegrating pot in acrylic glass or stainless steel.
Technical Specifications
General
- Completely stainless steel made.
- Good reproducibility of refining pressure, adjustable by means of weights.
- Volume : 35 L.
- Refining roller speed : 500 r.p.m.
- Calculation of the power used for obtaining the desired refining grade.
- Performance according to international standards
- Beatable amount of pulp, maximum : 360 g.
- Colouring and sizing tests.
- Protection cover.
- CE marking
Power: electricity: 400V / 50Hz W
Water drainage: 3/4″
Weight: 200kg / 285kg packaged
Dimensions: (w x l x h): 1200 x 600 x 1300 mm / 1500 x 900 x 1600 mm Packaged.
Related products
-
View Product
Multi Cutter multi strip | N4801
This new design device allows you to cut simultaneously several test pieces of variable width (the edges being parallel)
- Accuracy less than 0.1 mm.
- Samples cut by small sharpened knobs
- No risk of interruption cutting different sizes
- Variable length N490X.Y
- X: Number of bands (1 to 5)
- Y: Width of the samples (12.7 mm to 100 mm)
-
View Product
Bauer McNett fibers classifier | 070314
For the determination of the pulp fibre length by classification method.
-
View Product
33-29 Schopper Riegler Beating and Freeness Tester
The Schopper Riegler Beating and Freeness Tester is designed to determine the rate of drainage of a dilute pulp suspension and express it in terms of the Schopper Riegler (SR) value.
-
View Product
Disintegrator | N6200_A
For the standardised disintegration of pulp suspension according to the standards.
