Bubble Leak Tester BLT-V
The BLT leak tester uses a regulated pressure to 850 mbar to test The integrity of sealed packs. Convenient, easy to use and quick to test single or multiple packs.
Description
Sealed packs are placed into the bubble leak tester water bath, a soft close hinged lid submerges them below the water level. An isolation switch is
opened causing the pack internal pressure to increase to the pre-set pressure. The operator observes the packs through the chamber
walls, a steady stream of bubbles indicates the location of any leaks. Burst testing can be conducted by gradually increasing the
pressure and observing the pressure gauge when the pack opens.
For the positive pressure BLT, see Bubble Leak Tester BLT-P.
Video
Features & Benefits
- Leak / Seal integrity tests to pre-set pressures.
- Burst testing to determine seal strength.
- No trace gas in pack needed, no mains electric, semi-portable.
- Simple & fast for quality control.
- Drain / Fill valve, convenient for regular change of water.
- Various water tank sizes
Technical Specifications
| Model | Internal Chamber
Dimensions (mm) |
Specification |
| BLT-V400 | 420(L) x 320(W) x 300(H) | Bubble Leak Tester to test the integrity of sealed packs using compressed air through a venturi valve producing vacuum pressure from -100 to -850 mbar. Includes water tank and bench mounted stand, venturi vacuum generator, precision pressure regulator and gauge, isolation valve, and water drain connector. Requires clean, dry compressed air, typically 6-8 bar. |
| BLT-V500 | 520(L) x 320(W) x 300(H) | |
| BLT-V600 | 620(L) x 420(W) x 400(H) |
Resources
Related products
-
View Product
HSM-4 Laboratory Heat Sealer
For standard determination of heat sealability. Produces seals up to 50mm long x 5 to 25mm wide.
Precise control of heat sealing process variables (temperature, pressure, and dwell time), enables an optimal balance of material specification, packaging machine speed and seal integrity. Accuracy and repeatability in laboratory heat seal testing is vital, and the HSM-4 provides a standard range of controls for this purpose.
-
View Product
Check-A-Pack 200 Leak & Burst Package Tester
Measurement of micro leak hole size and burst pressure seal integrity with oxygen analysis, for all flexible and semi-rigid packaging.
-
View Product
HT-2PC Auto Heat Seal and Hot Tack Tester
Hot Tack Tester with automatic film feeding device for determination of the hot tack seal strength of packaging films, to ASTM F1921.
The HT-2PC Hot Tack Tester is a highly technical instrument designed to measure the ‘Hot Tack Seal Strength’ of flexible packaging materials. It follows the principles of ASTM F1921 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and blends comprising the sealing surfaces of flexible webs.
-
View Product
Gelbo Flex Tester
Gelbo Flex Tester designed to measure flexible barrier materials for flex durability to ASTM F392. The GF-392 Gelbo Flex Tester is a microprocessor controlled system, with a user controllable pre-set method programmed for ASTM F392. This makes the GF-392 both versatile and very easy to use, with only minimal user training needing.
