Strip Cutter 15mm or 25mm for HT-2PC
Strip Cutter for preparing long strips of samples, 15mm or 25mm wide, for Hot Tack and other testing.The HT-2PC Strip Cutter has been specifically designed for cutting very long strips of material like that use on the RDM HT-2PC Hot Tack Tester but can be equally used for preparing the strip samples for normal heat sealing and strength testing applications.
Description
The strip cutter has two blades mounted to a separate holder and therefore can be replaced easily when blunt. The blade holder is mounted onto a draw down carriage which is guided and running on two rails, this ensures parallel running and precise cutting.
A film clamp holds the film tightly to assist in the cutting of the material.
The strip cutter blade block is set to cut either 15mm or 25mm wide samples, please specify the width required when ordering, other non-standard widths can be made to order.
With this system if the sample you are cutting is overlapped several times then a very long sample can be cut up to 10 meters in length.
Resources
Related products
-
View Product
HSB-1 Laboratory Heat Sealer
For production of heat seals and/or measurement of heat sealability of flexible packaging. Produces seals up to 300mm long x 5 to 25mm wide.
-
View Product
HL-5 Low Pressure Heat Sealer (Multi-Jaw)
HL-5 Low Pressure Heat Sealer used to determine the sealability of various papers, foils, laminates and films.
The Low Pressure Heat Sealer HL-5 allows you to determine the sealability of coated paper, aluminium foils and laminates as well as other heat-sealable multi-layer films. You can easily determine the optimum sealing parameters for any film types used for pressure-sensitive packaging applications.
Our design is based on proven technology to fulfil the following requirements:
- Tests for research and development
- Quality control during the production process
-
View Product
CF-400 Precision Friction Tester
Touch Screen Precision Friction Tester for determining Static and Kinetic Friction of packaging materials to ASTM, BS, ISO and TAPPI standards
The CF-400 Precision Co-Efficient of Friction Tester measures the static and kinetic friction properties of plastic films, foils, laminates, papers and boards. The equipment performs tests to recognised international test standards including ASTM D1894, ISO 8295, BS 2782 Method 824A, and TAPPI T549.
-
View Product
HSG-3 & 5 Gradient Heat Sealer
For rapid determination of heat sealability of flexible packaging. Produces 3 or 5 independently temperature controlled seals, up to 15mm wide x 30mm long.
Precise control of heat sealing process variables (temperature, pressure, and dwell time), enables an optimal balance of material specification, packaging machine speed and seal integrity. Accuracy and repeatability in laboratory heat seal testing is vital, and the HSG Gradient provides precision digital controls for this purpose. Fitted with either 3 or 5 sets of sealing bars with individual temperature controls to create a temperature gradient across the film.
