22-22 Sample Punch
Precision sample punches are designed to eliminate the causes of errors associated with hand-cut samples.
Description
The accuracy of test results is not only dependent on the accuracy with which the procedure is carried out, but also on the accuracy of cutting the test pieces (specimens) from the original sample. Some tests, for example, tensile strength and edge crush, are particularly sensitive, and cutting accuracy is a prime cause of variation in the values obtained. These precision cutters are designed to eliminate the causes of errors associated with hand-cut samples.
Sample preparation is very important for the end result of the test. One mm difference on a 15mm width sample gives 6% deviation. This rectangular cutter with two solid gliders and a robust frame gives perfect accuracy and a long lifecycle.
Features & Benefits
Paper Tray – Since the samples fall in a special tray after bring cut, you can continue cutting several samples in a row without having to remove the samples first.
Sharp Sample – The blades used are hardened enduring their life-span. The cutting width is calibrated giving you a sample with exact dimensions.
Change Blades – The frame of the cutter is solid and robust. Even though the blades wear over time, it is possible to replace them.
Technical Specifications
Specifications
Model: 22-22 Series
Max sample thickness: 3 mm
Manual operation
Dimensions: 135 x 600 x 440 mm (5.5 x 24 x 17.5 in)
Weight: 29 kg (64 lbs)
Instrument can be bolted to the table
Available dimensions
22-22-00-0001 Rectangular punch 6″ x 1/2″
22-22-00-0002 Rectangular punch 300 x 50mm
22-22-00-0003 Rectangular punch 300 x 25mm
22-22-00-0004 Rectangular punch 300 x 15mm
22-22-00-0005 Rectangular punch 7″ x 1″
Resources
Related products
-
View Product
OX-TRAN ® 2/12
The OXTRAN 2/12 the world’s most advanced permeation system. Fully automatic oxygen 02 permeation system with faster results.
The OX-TRAN 2/12 series analyzers can test the Oxygen Transmission Rate (OTR) on both films and packages from low to high barriers. These analyzers are a lower cost option for reliable OTR analysis. The oxygen permeation measurement systems feature 2 independent cells with changeable horizontal test cartridges that allow a wide variety of sample sizes and types to be easily and accurately tested.
-
View Product
HL-5 Low Pressure Heat Sealer (Multi-Jaw)
HL-5 Low Pressure Heat Sealer used to determine the sealability of various papers, foils, laminates and films.
The Low Pressure Heat Sealer HL-5 allows you to determine the sealability of coated paper, aluminium foils and laminates as well as other heat-sealable multi-layer films. You can easily determine the optimum sealing parameters for any film types used for pressure-sensitive packaging applications.
Our design is based on proven technology to fulfil the following requirements:
- Tests for research and development
- Quality control during the production process
-
View Product
The Rotator R-20-120
These automated inline leak detection solutions integrate seamlessly into production lines, testing flexible MAP packages with precision and efficiency for optimal quality control.
-
View Product
Check-A-Pack 200 Leak & Burst Package Tester
Measurement of micro leak hole size and burst pressure seal integrity with oxygen analysis, for all flexible and semi-rigid packaging.
