TMI 73-19 Hot Disintegrator
Hot disintegration, pulp shows complete development of strength properties without further treatment. Tests to TAPPI T262
Description
With hot disintegration, pulp shows complete development of strength properties without further treatment. Disintegration time is typically reduced from 15 minutes to 2 minutes. Disintegrating pulp at elevated temperatures reduces latency by removing the stress that is found in fibers that have been disintegrated at lower temperatures. If disintegration is done in cold water, subsequent testing will not show the full strength development of the pulp. Disintegrating the pulp at elevated temperatures and low consistency relaxes the fibers, thus removing the latency.
Features & Benefits
Features:
- 316 Stainless frame
- Simple controls
- Meets TAPPI 262 and CPPA C8P
Technical Specifications
Specifications
- Meets TAPPI 262 and CPPA C8P
- Centrifugal Pump Motor: 240 litres per minute at 3450 rpm
- Water temperature: 90-95° C; distilled or demineralized water
Options
- 3 liter container (holds up to 56 g of oven-dried pulp)
- 7 liter container (holds up to 136 g of oven-dried pulp)
- 180 liter hot water tank
Connections
- Electrical: Specify voltage requirements when ordering
Accessories
Options
- 3 litre container (holds up to 56 g of oven-dried pulp)
- 7 litre container (holds up to 136 g of oven-dried pulp)
- 180 litre hot water tank
Applications
Applications
Pulp and Sheet Making Testing
Resources
Related products
-
View Product
84-56 Horizontal Tensile Tester
Tensile testing is the most widely used method for indicating the serviceability of many materials including Paper, Board, Tissue Paper and Non-wovens.
The model 84-56 Horizontal Tensile Tester combines a modern contemporary look with a robust mechanical design and new improved electronics including a colour touch screen and user-friendly interface. The menus are interactive and the large buttons are designed for easy access.
-
View Product
TMI 71-01 Chip Class
The 71-01 Chip Class™ is designed as a trouble-free chip classification system. A minimum of moving parts and carefully selected components gives you the most reliable chip classification system available on the market today.
-
View Product
AQUATRAN ® 3/40
The AQUATRAN 3/40 is the next evolution in whole package testing for Water Vapor Transmission Rate (WVTR)
This advanced analyzer integrates MOCON’s proven WVTR analyzer system with a precision environmental chamber to elevate package testing to the next level in accuracy, repeatability and ease of use. With special functions designed for package testing they greatly reduce overall test time while the new package testing cartridge designs offer simple sample preparation and improved repeatability of test results. They feature 4 independent cells with changeable test cartridges that allow a wide variety of package sizes and types to be easily and accurately tested, many without the use of epoxy.
-
View Product
17-56 Crush Tester
The Crush Test is designed as a robust, easy to-use instrument and is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics.
