58-06 Parker Print-Surf (Single Head)
The measurement of the Parker Print-Surf gives valuable information for the Printing Process. The data, the amount and the way the ink should be applied can be predicted. This information helps to avoid time consuming and costly printing problems.
Description
The Parker Print Surf measures the roughness of a wide variety of samples according to the Dr. John Parker method. With its high speed and pressure setting the Parker Print Surf simulates the way ink is applied during the printing process. The clamp pressure is adjustable making it possible to simulate different printing settings. The instrument is used for fine paper, coated paper, newsprint, coated board, linerboard, films and foils, packaging and carton board. A porosity head is available as an option to test the air permeancy.
Features & Benefits
Features
- Membrane keypad operation
- Dust purger
- Automatic
- specimen detection
- One-touch statistics display
- Built-in diagnostic routines
- Built-in calibration routine for plastic and paper reference standards
- Calibration device included
- Dual range to measure rougher samples
- Extended clamp pressure range for better printing simulation
- Measures roughness both sides or roughness/air permeance simultaneously (Dual Head Model only)
Technical Specifications
Specifications
- Number of measuring heads: One or two (58-07-00-0001)
- Roughness range-normal: 0.20 – 6.50μm
- Roughness range-high: 6.0 – 15.0μm
- Air permeance range – ISO 5636/1: 0 – 14.5μm.Pas
- Air permeance range – Bendtsen equivalent: 0-10000ml/min
- Air permeance range- Gurley equivalent: 1-6000s
- Clamp pressures – pre-set: 500, 1000, and 2000kPa
- Clamp pressures – custom setting: 100 – 5000kPa
- Conforms to ISO 8791/4 and TAPPI T555
Instrument Size
| Depth: | 558 mm (22 in.) | ||
| Height: | 430 mm (17 in.) | ||
| Width: | 380 mm (15 in.) |
Connections
| Electrical: | 85/264v AC, 47/440Hz 100VA Stable voltage (fluctuation free). | ||
| Air: | 550-700 kPa (instrument quality) |
Standards
ASTM D 3786, ASTM D 774, BS 4768, ISO 1328-2:1999, ISO 2758, ISO 2759, ISO 2960
Properties
Porosity, Printability, Roughness, Smoothness
Accessories
Accessories
- Thermal mini-printer
- Test-Link Data Acquisition Software
- Calibration Disc Set
Applications
Applications
Ink and Printability Testing, Medical Product Testing, Package Testing, Paper and Tissue Testing, Surface Property Testing
Industries
Inks and Coatings, Paper and Pulp
Resources
Related products
-
View Product
Can Leak Tester (CLT)
The CLT is adept at testing various can types, employing a vacuum decay method for quick and accurate detection of both micro and larger leaks, ensuring packaging reliability.
-
View Product
Bubble Leak Tester BLT-P
The BLT-P uses positive pressure via a needle / tube inserted into a pack meeting ASTM F2096. Convenient, easy to use and quick to test single or multiple packs.
-
View Product
HT-2PC Auto Heat Seal and Hot Tack Tester
Hot Tack Tester with automatic film feeding device for determination of the hot tack seal strength of packaging films, to ASTM F1921.
The HT-2PC Hot Tack Tester is a highly technical instrument designed to measure the ‘Hot Tack Seal Strength’ of flexible packaging materials. It follows the principles of ASTM F1921 Standard Test Method for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and blends comprising the sealing surfaces of flexible webs.
-
View Product
AQUATRAN ® Model 3
Highest Sensitivity for the Most Demanding Applications
The AQUATRAN 3 analyzer is the industries most trusted WVTR instrument for high to ultrahigh-level barriers because it can measure each molecule of water vapor entering the sensor. The analyzer is easy to use and offer the lowest detection levels available in the market. It features 2 independent cells with changeable horizontal test cartridges that allow a wide variety of sample sizes and types to be easily and accurately tested.
