SST-3XS Seal/ Tensile Tester

The SST-3XS Seal/Tensile Tester has been developed as a highly specialised machine to measure accurate low loads in tension and compression up to 50kg (500N). The machine is ideal for seal strength testing and general tension and compressive testing as required by the packaging plastics and paper industries.

The new SST-3XS features the latest in design and technology for machine set up, testing, measurement and recording using touch panel screen display units. Reliable control of the motor and leak screw drive system gives an impressive speed range that will fit your testing requirements. A range of grips and attachments enables a whole number of testing applications within the packaging plastics/paper and board industries.

Specifications:

Drive mechanisms:

• DC synchronous motor and gearbox with ball screw and crosshead.

Speed control:

• 1.0mm/min to 1000mm/min +/-0.5%

Speed feedback:

• Via line encoder

Touch panel screen:

• LCD, 256 Colour, QVGA, 320 x 240 pixels, 14.48 diagonal viewing.
• Touch screen, analogue resistive (gonze) with serial controller. Processor Geode SC2200. 266 MHz MMX compatible.
• 2 mbyte, on board flash memory for firmware.
• 64 MB Dram main memory

Load range:

• Changeable load cell
• 0-10kg (0-100N) = +/- 0.25% Fro
• 0-25kg (0-250N) = +/- 0.25% Fro
• 0-50kg (0-500N) = +/- 0.25% Fro

Standard grips:

• Light duty side entry vice grips
  

Travel:

• Min 550mm effective travel

Output:

• RS 232

Power:

• 80-240 VAC single phase 50/60 Hz 500W Max

Standard Equipment Supplied:

• 0-10kg (0-100N) Load Cell
• Side and top entry vice grips
• 1000g check weight

Options Available:

• Grips as required. Please discuss with sales
• Friction test attachment to ASTM, BS and ISO
• Roller for adhesive tape and label adhesion (90º pull)
• Flat plate for adhesive tape and label adhesion (180º pull)
• Software package for data logging via RS232 link.