TMI 22-25 Circular Sample Cutters

Product Ref: TMI 22-25

Precision sample cutters are designed to eliminate the causes of errors associated with hand-cut samples.

Introduction

The accuracy of test results is not only dependent on the accuracy with which the procedure is carried out, but also on the accuracy of cutting the test pieces (specimens) from the original sample. Some tests, for example, tensile strength and edge crush, are particularly sensitive, and cutting accuracy is a prime cause of variation in the values obtained. These precision cutters are designed to eliminate the causes of errors associated with hand-cut samples.

This puncher makes a sample in seconds. The instrument is mostly sold in a circular 100cm2 version, but can be supplied in different sizes and even with a square blade. The blade easily cuts paper or corrugated, but it is also suitable for aluminium, non-woven and even harder materials. The instrument is available in a manual and pneumatic version. 

Paper Tray - Since the samples fall on the table after being cut, you can continue cutting several samples in a row without having to remove the samples first.

Sharp Sample - The blades are made of hardened steel. This gives them a sharp edge for years giving you an accurate sample. 

Pneumatic or Manual - The frame of the cutter is solid and robust. The blades can be replaced making it possible to use the cutter for over 35 years.

Specifications

Model: 22-25 Series

Max sample thickness: 10 mm (depending on material stength)

Dimensions: 320 x 750 x 220 mm (13 x 30 x 9 in)

Weight: 36kg (80lbs)

Instrument can be bolted to the table

Available Dimensions

22-25-00-0001 Circular Sample Cutter 100cm2 Pneumatic

22-25-00-0002 Circular Sample Cutter 100cm2 Manual