TMI 22-80-00 Ray-Ran Autocycle Notching Cutter

Product Ref: TMI 22-80-00

Produce precise stress concentrated notch profiles in Impact and Charpy specimens

Introduction

A world leader by design, this machine will cut accurate notch profiles to International Test Standards such as ISO 179, ISO 180 and ASTM D256.

At the heart of the machine is a custom built adaptive Microprocessor Control Unit with LCD screen ensuring feed and cutter speeds are always selected for optimum performance.

The anti-vibration guide rail system optimizes profile accuracy and the multi-sample loading feature of the vice can accommodate up to 16 test specimens 4mm thick, all accurately cut within 20 seconds increasing productivity. The quick auto-return feature ensures the vice is always in the correct place for loading and unloading the test specimens and the micro height adjustment, notch depth comparator and sample setting gauge ensure that the cut notch depth is accurately controlled.

Cutter wheel profiles of 0.1mm and 1.0mm radius as well as 0.8mm and 2.00 'U' notch cutter wheels are also available. Non-standard and special notch requirements can also be provided for.

Features

  • Cutter speed range from 350 rpm to 2500 rpm
  • Traverse speed range 0.06 mm/rev to 1.0 mm/rev
  • Metric and imperial traverse speed units
  • Anti-vibration linear motion slide
  • Multi-sample loading
  • Cutter wheel 0.25mm radius included
  • Notch depth comparator
  • Notch depth gauge block
  • Easy clean removable waste tray
  • Polycarbonate safety guard
  • Electrical Interlock
  • Emergency stop button
  • Notches to International Test Standards, including: ASTM D256, D6110, ISO 179, 180, 8256, DIN 53453

Notch Cutter Size

  • Weight: 15 kg
  • Shipping Dimensions DxWxH: 33 x 54 x 25 cm

Notch Specifications

IZOD IMPACT

ASTM D256
Notch Dimensions: Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 10.16 ±0.05 mm

CHARPY IMPACT

ASTM D 6110
Notch Dimensions: Radius: 0.25 ±0.05 mm
Width remaining under notch: 10.16 ±0.05 mm

IZOD IMPACT

ISO 180
Notch Dimensions: Radius: 0.25 ±0.05 mm 45°
Width remaining under notch: 8 ±0.2 mm

Charpy Testing

The specimen is mounted horizontally and supported unclamped at both ends. The pendulum is released and allowed to strike through the specimen.

Izod Testing

A test specimen is clamped perpendicular into the impact tester's fixture with the notched side facing the striking edge of the pendulum. The pendulum strikes through the specimen.

Connections

Electrical: Specify voltage requirements when ordering

Ordering Information

Catalog Number: 22-80-00