TMI 13-01 Aluminum Test Foils for Burst Tester

Product Ref: TMI 13-01

Standardized aluminum foil (test foils) for checking the overall performance of Burst Testers. One package contains 10 sheets, each sheet measuring 3 inches by 3 inches.

Introduction

 Standardized aluminum foil (test foils) for checking the overall performance of Burst Testers. One package contains 10 sheets, each sheet measuring 3 inches by 3 inches.

Standards

ISO 2758, ISO 2759, PAPTAC D 19, PAPTAC D 8, TAPPI T 403, TAPPI T 807
 

Applications

Paper and Tissue Testing, Textile and Non-Wovens Testing
 

Industries

Consumer Products, Corrugated and Board, Nonwoven and Textiles, Other, Paper and Pulp
 

Properties

Burst Strength
 

Model "A" Burst Tester

Range Pressure (kPa) Pressure (psi) Ordering P/N
J 275-475 40-69 13-01-31
K 482 614 13-01-32
L 621-896 90-130 13-01-21
M 903-1172 131-160 13-01-26
R 1110-1379 161-200 13-01-30
S 1386-1724 201-250 13-01-33
 
Diaphragms 0-1500 13-01-20
Sheet rubber type, package of twelve
Diameter of each diaphragm is approximately 3.0625"

Model "C" Burst Tester

Range Pressure (kPa) Pressure (psi) Ordering P/N
A 35-69 5-10 13-02-13
AA 76-138 11-20 13-02-19
B 145-207 21-30 13-02-14
C 214-345 31-50 13-02-15
D 352-448 51-65 13-02-16
E 455-552 68-80 13-02-17
F 558-758 81-110 13-02-18
G 765-1034 111-150 13-02-21
 
Diaphragms 0-200 13-02-20
Sheet rubber type. Type 214, package of twelve.
Diameter of each diaphragm is approximately 1.75”

This aluminum foil is standardized on Model "A" and Model "C" Burst Testers that are adjusted and operated in accordance with the following Standards: PAPTAC D.8 and D19, TAPPI T403 and T807 and ISO 2758 and 2759, using a pressure transducer and a digital readout. The pressure transducer is verified against a dead weight tester that is traceable to the National Research Council of Canada.