Industrial

Companies around the world rely on the accuracy and ease of use of RDM Test Equipment, that's why you can be confident in your choice.

Benefits: • Quality Control of materials, process variables, and end of line materials/packages • Research & Development of the physical characteristics of materials and pack designs • Analyse Shelf Life attributes • Reduced costs, improved sustainability • Increase productivity through optimised package cycle rates, and reduced wastage • Protection/increase brand value • Quality Assurance with on-line analysis • Traceability / Regulatory / Contract compliance, using International Testing Standards.

 White Paper: Water Vapour Permeation Testing of Ultra-Barriers

  • CF800-XS Precision Friction Tester

    Touch Screen Precision Friction Tester for determining Static and Kinetic Friction of packaging materials to ASTM, BS, ISO and TAPPI standards

  • Check-A-Pack 200 Leak & Burst Package Tester

    Measurement of micro leak hole size and burst pressure seal integrity for all flexible and semi-rigid packaging.

  • Check-A-Pack 202 Leak, Burst and Oxygen Tester

    Measurement of micro leak hole size and burst pressure seal integrity with oxygen analysis, for all flexible and semi-rigid packaging.

  • Check-A-Pack 222 Leak, Burst, Oxygen & CO2 Tester

    Measurement of micro leak hole size and burst pressure seal integrity with oxygen and carbon dioxide analysis, for all flexible and semi-rigid packaging.

  • Cooled Incubators

    A range of Cooled Incubators, with capacities from 56 to 750 litres, and temperature range from -10deg.C to 70deg.C

  • Cutting Dies Ruler Type - C0025

    The Ruler Type Cutting Dies are used for
    cutting of plastic film, paper and rubber samples
    used for tensile and tear testing (dumbbell,
    trouser, etc).

  • Cutting Dies Tool Steel - C0024

    The Tool Steel Cutting Dies are used for the cutting of plastics, paper, textiles and rubber samples.

  • Cutting Press - 3 Tonne - C0022

    Arbour Press with Tool Steel cutting dies for fast and repetitious sample preparation.

  • Drying Ovens

    A range of fan assisted circulation drying ovens, with capacities from 15 to 750 litres, and temperature range ambient to 300 deg.C

  • Gelbo Flex Tester

    Gelbo Flex Tester designed to measure flexible barrier materials for flex durability to ASTM F392

  • Glow Wire Tester

    Used to simulate the effect of thermal stresses, which may be produced by heat sources.

  • Haze-gard i

    The BYK Haze-gard i quantifies the visual perception of films with objective measurement data.

  • HS-2 Laboratory Heat Sealer

    For precise measurement of heat sealability of flexible packaging. Produces seals up to 50mm long x 5 to 25mm wide.

  • HS-650 Production Heat Sealer

    For production of high quality heat seals in flexible packaging. Produces seals up to 650mm long x 5 to 25mm wide.

  • HSB-1 Laboratory Heat Sealer

    For production of heat seals and/or measurement of heat sealability of flexible packaging. Produces seals up to 300mm long x 5 to 25mm wide.

  • HSE-3 Laboratory Heat Sealer

    For production of high quality heat seals and/or precise measurement of heat sealability of flexible packaging. Produces seals up to 300mm long x 5 to 25mm wide.

  • HSG-3 & 5 Gradient Heat Sealers

    For rapid determination of heat sealability of flexible packaging. Produces 3 or 5 independently temperature controlled seals, up to 15mm wide x 30mm long.

  • HT-1XS Hot Tack Tester

    Touch Screen Precision Hot Tack Tester for determination of the hot tack seal strength of flexible packaging materials, to ASTM F1921.

  • Lippke® 4000

    Leakage Testing and Seal Strength Testing of flexible, semi-rigid and rigid packages.

  • Lippke® 4500

    PC-controlled Leak and Seal Strength Test System for Flexible and Semi Rigid Packages

  • Lippke® VC 1380

    Vacuum Leak Detection System for Blisters and other rigid or semi rigid Packages

  • OpTech®-O2 Platinum

    Optical fluorescence Oxygen Analyser for measuring Headspace, Dissolved Oxygen, and Oxygen Permeation of films and packages.

  • OX-TRAN ® 2/22

    The world's most advanced Oxygen permeation measurement system. Fully automatic testing, fast set-up, faster results, no Oxygen sensor calibration needed.

  • PERMATRAN-W 3/34G

    The world's most advanced Water Vapour permeation measurement system. Fully automatic testing, fast set-up, faster results, lower cost of ownership.

  • PGW-M Precision Balances

    A range of Precision Balances designed to meet the needs of Laboratories, Schools, Industry and Commercial users.

  • PMB Moisture Balances

    The PMB takes the hassle out of moisture analysis, for fast and accurate results.

  • SealScope™

    Monitoring Seal Integrity of packages from flow pack machine types, for 100% on-line inspection of seal integrity at the packaging line.

  • SST-3XS Seal Strength / Tensile / Compression Tester

    Touchscreen Precision Seal Strength / Tensile / Compression Tester for determining the strength of packaging materials including plastics, paper and board.

  • Thermostatic Chambers

    A range of Thermostatic Chambers, with capacities from 65 to 300 litres, and temperature range from 3deg.C to 40deg.C

  • TMI 10-20 Digital Ink Rub Tester

    The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance.

  • TMI 13-62 Burst Tester for Textiles

    Burst Testers are used as a multi-directional tensile test to identify failure in the direction of least resistance for evaluating physical strength and fiber bond.

  • TMI 17-56 Crush Tester

    The Crush Test is designed as a robust, easy to-use instrument. Exactly what you need when performing crush tests. The Crush Tester is suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics.

  • TMI 17-76 Compression Tester

    Designed in close cooperation with industry, the Compression Tester is rugged enough for any production testing environment. Utilizing intuitive hardware features and menu-driven software, the 17-76 is designed to provide highly accurate measurement of compressive strength for a variety of materials.

  • TMI 17-77 Top Load Compression Tester

    The Top Load Compression Tester meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products. A new enhanced microprocessor design with servo motor provides precision force and position control for repeatable instrument performance.

  • TMI 22-80-00 Ray-Ran Autocycle Notching Cutter

    Produce precise stress concentrated notch profiles in Impact and Charpy specimens

  • TMI 32-25 Inclined Plane Friction Tester

    Slide Angle Friction is a measurement of the angle of inclination at which one substrate affixed to a sled will begin to slide/slip against another substrate of a similar material.

  • TMI 43-76 Pendulum Impact Tester for Rigid Plastics

    The 43-76 Pendulum Impact Tester measures the impact resistance of rigid materials in accordance with a wide variety of testing standards.

  • TMI 46-02-01-0001 Standard Melt Flow System

    The 6MBA is the basic model offered within the Ray-Ran Range of Melt Flow Indexers. The manually operated test procedure is very simple to undertake.

  • TMI 46-02-01-0002 Advanced Melt Flow System

    The 6MPCA is the most advanced digital model offered within the Ray-Ran range of melt flow index testers. The operating procedure is simple to undertake using its on-board advanced microprocessor technology.

  • TMI 49-56 Digital Micrometer

    Designed for thickness measurements of sheet materials, configurable to meet any ISO, ASTM, EDANA or other International specifications for paper, corrugated, plastics, plastic film, tissue paper, nonwovens, textiles and other sheet like substrates.

Page: 1 | 2 | Next »